The telescopic truck SK-A30 was specifically designed for low profile mining. Due to the front axle suspension the dump truck has an ideal ground contact, regardless of whether the vehicle is empty or loaded. This is guaranteed even at high speeds with bad ground conditions exceeding 30 km/h. Whether the loading is done by roadheaders or by LHDs with an ejector bucket a secure and fast loading is guaranteed due to its good visibility and maneuverability. By means of hydraulic cylinders and a "push plate" a fast, smooth and low-wear discharge is guaranteed. This avoids the need for extensive expansions at the transfer points. Different cabin designs are offered for different applications.

MAIN FEATURES

  • Telescopic dumper for low seam heights
  • Compact, simple and powerful design
  • Soft rock and hard rock applications
  • Bi-directional cabin safes time and increases productivity (optional)
  • Great power to weight ratio
  • Extremely robust GHH frame and system design resulting in lowest operating cost
  • Load sensing hydraulics for higher energy efficiency

TECHNICAL SPECIFICATIONS

  • Main Dimensions
    Length10 883 mm
    Width (at ejector box)3 470 mm
    Height, laden (above ejector box)2 977 mm
    Height, laden (above cabin)2 897 mm
    Sliding box capacity21.5 m³
  • Tramming Capacities
    Max. tramming speed (laden fwd/ rev on level road)
    1st gear5.5 km/h / 5.7 km/h**
    2nd gear9.5 km/h / 10.0 km/h**
    3rd gear15.8 km/h / 17.8 km/h**
    4th gear26.5 km/h / 31.5 km/h**
    Max. admissible gradient25 %
    ** Converter / Lock up mode
  • Weights
    Operating weight36 309 kg
    Payload capacity30 000 kg
    Front axle, empty22 161 kg
    Rear axle, empty14 148 kg
    Front axle, loaded27 536 kg
    Rear axle, loaded38 773 kg
  • Engine
    ManufacturerDeutz
    TypeTCD12.0
    DesignWater cooled diesel engine
    Power output300 kW / 2000 min-1
    Air intake systemDry air filter
    Exhaust systemSCR
    Starter power / voltage6.5 kW / 24 V
    Alternator current / voltage80 A / 28 V
    Emission standardEPA Tier4f/EU Stage IV
  • Engine Option
    TypeDeutz TCD2015 V06
    Power output300 kW / 2000 min-1
    Exhaust systemCatalyst, silencer
    Emission standardEPA Tier3/EU Stage IIIA
  • Drive Train
    Torque converter
    ManufacturerDana
    TypeSeries CL 8 000
    DesignSingle stage with Lock-up
    Power shift transmission
    ManufacturerDana
    TypeSeries R 6 000
    DesignFour gears forward / reverse
  • Axles
    Front and rearRigid planetary axle
    ManufacturerKessler
    TypeD91 NLB-FS
    DifferentialStandard
  • Brakes (Service and Parking)
    DesignMulti disk spring brake (SAHR)
  • Steering
    DesignSwivel joint hydr. power steering
    Steering angle± 42°
    Outer turn radius9 630 ± 350 mm
    Inner turn radius5 200 ± 350 mm
  • Steering Hydraulic System
    Pump displacement volume45 + 45 cm³/rev
    System pressure175 bar
    Number of steering cylinders2
  • Ejector Hydraulic System
    Pump displacement volume45 + 45 cm³/rev
    System pressure185 bar
    Number of ejector cylinders2
  • Filling Volumes
    Fuel tank475 l
    Hydraulic tank430 l
    Engine with oil filterapprox. 40 l
    Torque converter / power shift transmissionapprox. 58
    Front axle differential47 l
    Front axle planetary gear2 x 4.5 l
    Rear axle differential47 l
    Rear axle planetary gear2 x 4.5 l
  • Electrical Equipment
    Operating voltage24 V
    Battery2 x 12 V / 180 Ah
  • Lighting System
    Main / reverse headlightsLED
    Additional headlightsLED
  • Main Options
    Central lubrication systemCamera system
    Fire suppression, manual / autoCollision avoidance systems
    Diesel particulate filterAggressive environment kit
    Automatic engine braking systemFast fuelling system
    Air conditionTrainer seat
    Heating systemSpare wheel
    Pressurized cabin